General size of automatic door:

1600*825*350 specifications (mm), 1250*550*250 specifications (mm), 1200*500*200 specifications (mm).

Features: when someone or objects near, it will automatically open the door.When an object approaches, the door does not open.Induction doors can be roughly divided into translation, rotation and push - pull type.Among them, the translation type and the rotation type are most suitable for setting the sensor.Induction door is suitable for guesthouses, hotels, banks, office buildings, hospitals, shops and so on. It is widely used.The use of induction door, can save air conditioning energy, reduce noise, windproof, dustproof, at the same time can make the entrance looks solemn and high-grade.

There are many kinds of automatic induction doors. First of all, the translational induction door group is composed of the following components:

1, the main controller: it is the command center of the automatic door, through the internal programmed instruction program of the large-scale integrated block, issued the corresponding instructions, command motor or electric lock system work;At the same time, people adjust the door opening speed, opening range and other parameters through the main controller.

2, induction detector: responsible for collecting external signals, like people's eyes, when a moving object into its working range, it will give the main controller a pulse signal;

3, power motor: provide the main power to open and close the door, and control the acceleration and deceleration of the door.

4. Door moving track: just like the track of a train, the hanger running wheel system of the door fan is constrained to make it move in a specific direction.

5, door sling wheel system: used to hang the movable door, at the same time under the power of traction to drive the operation of the door.

6, synchronous belt (some manufacturers use triangle belt) : used to transmit the power produced by the motor, traction door sling wheel system.

7. Lower guide system: it is the guide and positioning device for the lower part of the door fan, which prevents the front and rear door body from swinging when the door fan runs.